Canon PowerShot SX60 HS - Manual (Page 102)

102
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Switching Display Modes
Still Images Movies
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (= 181).
Open the screen to activate it when the camera is on. This will deactivate
the viewfinder. Similarly, close the screen (facing the camera body) to
deactivate it and activate the viewfinder (= 20).
No Information Display
Simple Information Display
Detailed Information Display
RGB Histogram, GPS Information
Display
● Switching display modes is not possible while the camera is
connected via Wi-Fi to devices other than printers.
● Movies are identified by a [ ] icon.
To play movies, go to step 3.
3
Play movies.
● To start playback, press the [ ] button to
access the movie control panel, press the
[ ][ ] buttons to choose [ ], and then
press the [ ] button again.
4
Adjust the volume.
● Press the [ ][ ] buttons to adjust the
volume.
● To adjust the volume when the volume
indicator (1) is no longer displayed, press
the [ ][ ] buttons.
5
Pause playback.
● To pause or resume playback, press the
[ ] button.
● After the movie is finished, [ ] is
displayed.
● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
● To deactivate Scroll Display, choose MENU (= 30) ► [ ] tab
► [Scroll Display] ► [Off].
● To have the most recent shot displayed when you enter Playback
mode, choose MENU (= 30) ► [
] tab ► [Resume] ►
[Last shot].
● To change the transition shown between images, access MENU
(= 30) and choose your desired effect on the [
] tab ►
[Transition Effect].
(1)