Auto zooming to keep faces at a constant size, Adjusting the constant face display size – Canon PowerShot SX60 HS User Manual

Page 42

Advertising
background image

42

Before Use

Basic Guide

Advanced Guide

1

Camera Basics

2

Auto Mode /

Hybrid Auto Mode

3

Other Shooting Modes

5

Tv, Av, M, C1, and C2 Mode

6

Playback Mode

7

Wi-Fi Functions

8

Setting Menu

9

Accessories

10

Appendix

Index

4

P Mode

3

Shoot.

Even after you shoot, [ ] remains around

the face displayed at a constant size.

To cancel constant face display size,

press the [ ] button again. [ Auto: Off]

is displayed.

Adjusting the Constant Face Display Size

When Auto is on, press the [ ][ ]

buttons or turn the [

] dial to choose

the desired option.

The camera zooms automatically to keep

faces at the specified size.

Face

Keep faces large enough to show facial expressions

clearly.

Upper Body

Keep faces small enough to show the person’s upper

body.

Whole Body

Keep faces small enough to show the person’s entire

body.

Manual

Keep faces at the size specified by moving the zoom

lever. Release the zoom lever once the desired size

has been obtained.

A face may not be displayed at a constant size relative to the
screen at some zoom factors, or if the person’s head is tilted or
facing the camera indirectly.

During movie recording, a changed zoom factor and camera
operating sounds are recorded.

When

Auto is on, some shooting information is not displayed,

and some shooting settings cannot be configured.

Although no image stabilization icon is shown while you hold
down the [

] button, image stabilization optimal for shooting at

the telephoto end is applied.

To fine-tune the size of subjects gradually, move the zoom lever
while holding down the [

] button.

Auto Zooming to Keep Faces at a Constant Size

Still Images

Movies

The camera automatically zooms in and out to keep a detected face

(= 83) at a constant size on the screen. If the person moves closer, the

camera automatically zooms out, and vice versa. This size can also be

adjusted, as needed.

1

Enter [ ] Auto mode.

Press and release the [ ] button quickly.

[ Auto: On] is displayed.

2

Choose the face.

[ ] is displayed once a face has been

detected.

If multiple faces are detected, press the

[

] button to switch to the face to keep

at a constant size.

The camera zooms in and out to keep the

face framed by [ ] at a constant size on

the screen.

Advertising
This manual is related to the following products: