Canon PowerShot SX60 HS - Manual (Page 87)

87
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Adjusting the Flash Exposure Compensation
Still Images Movies
Just as with regular exposure compensation (= 72), you can adjust the
flash exposure from –2 to +2 stops, in 1/3-stop increments.
● Raise the flash, press the [ ] button and
immediately turn the [ ] dial to choose
the compensation level, and then press
the [ ] button.
● The correction level you specified is now
displayed.
● When there is a risk of overexposure, the camera automatically
adjusts the shutter speed or aperture value during the flash shots
to reduce washed-out highlights and shoot at optimal exposure.
However, you can deactivate automatic adjustment of the shutter
speed and aperture value by accessing MENU (= 30) and
choosing [
] tab ► [Flash Control] ► [Safety FE] ► [Off].
● You can also configure the flash exposure compensation by
accessing MENU (= 30) and choosing [
] tab ► [Flash
Control] ► [Flash Exp. Comp].
● You can also access the [Built-in Flash Settings] MENU screen
(= 30) as follows (except when an optional external flash is
mounted).
- When the flash is up, press the [ ] button and immediately
press the [
] button.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 90).
● In [ ] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Off
For shooting without the flash.
● If a blinking [ ] icon is displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions,
mount the camera on a tripod or take other measures to keep
it still.