Canon EOS 1D X Mark II - Manual (Page 129)

129
Responding to Error Messages
 Are any obstacles blocking the line of sight between the
transmitter and the antenna of the access point?
 Move the antenna of the access point to a position clearly visible
from the point of view of the transmitter (p.136).
What to check on the transmitter
 Does the SSID set on the transmitter match that of the access
point?
 Check the SSID at the access point, then set the same SSID on
the transmitter (p.31).
What to check at the access point
 Is the access point turned on?
 Turn on the power of the access point.
 If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
 Register the MAC address (p.116) of the transmitter used at the
access point.
What to check on the transmitter
 Is the transmitter configured for communication in
infrastructure mode?
 Configure the transmitter for communication in ad hoc mode.
What to check at the access point
 Is there a nearby access point for ad hoc communication?
 Set up an access point for ad hoc communication near the
transmitter.
61: Selected SSID wireless LAN network not found
62: No response from wireless LAN terminal