Canon EOS 1300D - Manual (Page 18)

18
Basic Operation and Settings
4
Select the Wi-Fi function to
connect to.
Press the <W> <X> or <Y> <Z>
keys to select an item.
X When the connection settings are not
registered, the setting screen is
displayed.
X When the connection settings are
already registered, the reconnection
screen is displayed.
For further connection settings, see the pages that correspond to the
device to be connected and connection method.
When using the NFC function, see page 20.
Set to [Enable] to enable the selection of [Wi-Fi function] under the
[53] tab.
When the use of electronic devices and wireless devices is
prohibited, such as on board airplanes or in hospitals, set it to
[Disable].
When it is set to [Enable], you cannot use the camera by connecting
it to Connect Station, a computer, printer, GPS receiver, TV set, or
other device with a cable (p.19).
When you want to prioritize the wireless connection, do not operate the
power switch, Mode Dial, card slot/battery compartment cover, or other
parts. Otherwise, the wireless connection may be terminated.
[Wi-Fi/NFC]
Using the Camera While Wireless Functions Are Active