Canon EOS 1300D - Manual (Page 35)

35
Operating the Camera Using a Smartphone
To terminate the connection, perform either of the following operations.
On the smartphone’s Camera
Connect screen, tap [t].
Set the camera’s power to
<2>.
Terminating the Connection
While connected, a picture cannot be taken even if the camera’s shutter
button is pressed. Also, movie shooting is not possible.
In remote shooting, the AF speed may become slower.
Depending on the transmission range and connection status, image
display may be delayed, images may not be displayed smoothly, shutter
release may be delayed, or other problems may occur.
Even if movies are displayed in the list, they cannot be saved to a
smartphone.
If you send RAW images to a smartphone, the high ISO speed noise
reduction effect of saved images on the smartphone may become
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to 1+73 is recommended.
The connection will also be terminated if you turn the Mode Dial or open
the card slot/battery compartment cover.
If you send RAW images to a smartphone, they will be resized to b and
saved.
While connected, the camera’s auto power off does not function.
While connected, disabling the smartphone’s power saving function is
recommended.
The camera’s <k> lamp will blink rapidly when images stored in the
camera are being saved to a smartphone.