Canon EOS 1300D - Manual (Page 96)

96
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function] (p.17).
If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select [m].
Select [m] (Upload to Web service)
and press <0>.
3
Select a Web service.
Select a Web service to connect to,
then press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings (p.91).
The Web service to connect to can be
changed when reconnecting (p.108).
X The camera’s <k> lamp will blink.
Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination
(p.103).
Connecting via WPS (PIN Mode)