Canon EOS 1300D - Manual (Page 189)

189
Handy Features
 [Auto reset]: The file numbering restarts from 0001 each time
the card is replaced or a new folder is created.
When you replace the card or create a folder, the file numbering
restarts from 0001 for the new images saved. This is useful if you
want to organize images by cards or folders.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images may
continue from the file numbering of the existing images on the card
or in the folder. If you want to save images with the file numbering
starting from 0001, use a newly formatted card each time.
 [Manual reset]: To reset the file numbering to 0001 manually or
to start from file number 0001 in a new folder.
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001.
This is useful, for example, when you want to use different folders for
the images taken yesterday and the ones taken today. After the
manual reset, the file numbering returns to continuous or auto reset.
(There will be no manual reset confirmation dialog.)
File numbering after
replacing the card
File numbering is reset
File numbering after
creating a folder
Card-1 Card-2
0051 0001
Card-1
100 101
0051 0001
If the file number in folder 999 reaches 9999, shooting will not be possible
even if the card still has storage capacity. The LCD monitor will display a
message telling you to replace the card. Replace it with a new card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “.MOV” for movies.