Canon EOS 1300D - Manual (Page 248)

w Printing
248
In step 4 on page 246, select the printing
effect. When the <e> icon is displayed
brightly next to <z>, you can press
the <B> button to adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
 Brightness
The image brightness can be adjusted.
 Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <
h >. Press the <Y> <Z> keys to freely
adjust the shadow level (0-127) or highlight
level (128-255).
 k Brightener
Effective in backlit conditions where the subject’s face looks dark.
When [On] is set, the face will be brightened for printing.
 Red-eye corr.
Effective in flash images where the subject has red eyes. When [On]
is set, the red eye will be corrected for printing.
e Adjusting Printing Effects
 The [ k Brightener] and [Red-eye corr.] effects will not be reflected on
the screen.
 When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use the <
S > cross keys. B is for blue, A for amber, M for
magenta, and G for green. The image’s color balance will be adjusted
toward the color in the direction of the move.
 If you select [Clear all], all the printing effect settings will be reverted to
their defaults.