Using a remote switch, Fusing a remote switch – Canon EOS 1300D User Manual

Page 271

Advertising
background image

271

Remote Switch RS-60E3 (sold separately) comes with an approx. 60 cm/
2.0 ft cord. When connected to the camera’s remote control terminal, it
can be pressed halfway and completely, just like the shutter button.

When you use the self-timer, bulb, or a remote switch and do not look
through the viewfinder, stray light entering the viewfinder can cause the
picture to look dark. To prevent this, use the eyepiece cover (p.33)
attached to the camera strap.
During Live View shooting and movie shooting, attaching the
eyepiece cover is unnecessary.

1

Detach the eyecup.

Push the bottom of the eyecup to
detach it.

2

Attach the eyepiece cover.

Slide the eyepiece cover down into
the eyepiece groove to attach it.

After you finish shooting, detach the
eyepiece cover and attach the
eyecup by sliding it down into the
eyepiece groove.

F

Using a Remote Switch

Using the Eyepiece Cover

Remote Controller RC-6, RC-1, and RC-5 (all sold separately) cannot be
used with this camera.

Advertising