Canon EOS 1300D - Manual (Page 295)

295
Troubleshooting Guide
 If the LCD monitor is dirty, use a soft cloth to clean it.
 In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
 [Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card’s connection
status or disable Eye-Fi transmission (p.274).
 It is the highlight alert (p.234). Overexposed areas with clipped
highlight will blink.
 If the image is protected, it cannot be erased (p.228).
 Movies edited with a computer cannot be played back with the
camera.
 If you operate the camera’s dials or lens during movie shooting, the
operation sound will also be recorded.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.
Camera operation sound can be heard when the movie
is played back.