Canon EOS 80D - Manual (Page 288)

W-40
Register the target camera to connect to wirelessly. The camera can be
connected to only one camera at a time.
1
Select [Wireless communication
settings].
 Under the [51] tab, select [Wireless
communication settings], then
press <0>.
2
Select [Wi-Fi function].
 Set [Wi-Fi/NFC] to [Enable], then
select [Wi-Fi function].
3
Select [z] (Transfer imgs
between cameras).
4
Start the connection on the target
camera.
 When the screen on the left is
displayed on the camera, start the
connection on the target camera as
well. For the operation procedure,
refer to the instruction manual of the
target camera.
X When a connection is established, an
image on the card is displayed.
Connecting to a Camera