Still photo shooting – Canon EOS 80D User Manual

Page 302

Advertising
background image

k

Shooting Movies

302

Still photo shooting is not possible during movie shooting. To
shoot still photos, stop shooting the movie and perform viewfinder
shooting or Live View shooting.

Still Photo Shooting

Cautions for Movie Shooting

Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.

When you press the shutter button halfway to autofocus during movie
shooting, the following phenomena may occur.
• Focus may become far off momentarily.
• The brightness of the recorded movie may change.
• The recorded movie may be momentarily still.
• The movie may record the lens mechanical sound.

If <Q> or <Qw> is set and the ISO speed or aperture changes during
movie shooting, the white balance may also change.

If you shoot a movie under fluorescent or LED lighting, the movie may
flicker.

Shooting a few test movies is recommended where you will perform
zooming during movie shooting. Zooming during movie shooting may
result in recording of changes in exposure or mechanical sound of the
lens, or images may be out of focus.

During movie shooting, you cannot magnify the image even if you press
the <u> button.

Be careful not to cover the built-in microphones (p.294) with your finger, etc.

If you connect or disconnect the HDMI cable during movie shooting, the
movie shooting will end.

General Movie Shooting Cautions are on pages 343-344.

If necessary, also read General Live View Shooting Cautions on
pages 290-2
91.

Do not hold the camera in the same position for long periods of time.
Even if the camera does not feel too hot, prolonged contact with the same
body part may cause skin redness or blistering due to low-temperature
contact burns. Using a tripod is recommended for people with circulation
problems or very sensitive skin, or when using the camera in very hot
places.

Advertising