Canon EOS 80D - Manual (Page 320)

N Shooting Time-lapse Movies
320
4
Set the shooting interval and
number of shots.
 Check the [k: Time required] and
[3: Playback time] displayed at the
bottom of the screen to set the
shooting interval and number of shots.
 Select the number to be set (hours:
minutes: seconds / number of shots).
 Press <0> so <r> is displayed.
 Set the desired number, then press
<0>. (Returns to <s>.)
 Shooting interval
Settable from [00:00:01] to [99:59:59].
 Number of shots
Settable from [0002] to [3600]. Set one digit at a time. If 3600 is set,
the time-lapse movie will be approx. 2 min. for NTSC and approx. 2
min. 24 sec. for PAL.
5
Select [OK].
 The screen for step 2 will reappear.
6
Check the settings.
 With [Time-lapse movie] selected on
the screen in step 2, press <0>.
 The current settings will be displayed.
 Time required
Indicates the time required to shoot the set number of shots with the
set interval. If it exceeds 24 hours, “*** days” will be displayed.
 Playback time
Indicates the movie recording time (time required to play back the
movie) to create the time-lapse movie in L 6W (NTSC) or
L 5W
(PAL) from the still photos taken with the set intervals.
Time required Playback
time