Canon EOS 80D - Manual (Page 426)

3 Custom Function SettingsN
426
C.Fn III -3 Retract lens on power off
This is to set the lens retraction mechanism for when a gear-driven
STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You
can set it to retract the extended lens automatically when the camera’s
power switch is set to <2>.
0: Enable
1: Disable
C.Fn III -4 Custom Controls
You can assign often-used functions to camera buttons or dials
according to your preferences. For details, see page 433.
 With auto power off, the lens will not retract regardless of the setting.
 Before detaching the lens, make sure that it is retracted.
With setting [0: Enable], this function takes effect regardless of the lens’s
focus mode switch setting (AF or MF).