Panasonic Lumix DMC-G7 body - Manual (Page 173)

173
5. Focus and Brightness (Exposure) Settings
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
• You can switch the functions between the rear dial and the front dial by pressing [DISP.].
• The Exposure Compensation value can be set within a range of j5 EV to i5 EV.
When recording motion pictures, the Exposure Compensation value can be set within a
range of j3 EV to i3 EV.
When recording 4K photos, the Exposure Compensation value can be set within a
range of j3 EV to i3 EV.
• Select [0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
• This operation is possible only when [Firing Mode] (P233) in [Flash] is set to [TTL].
• Flash output can also be adjusted using [Flash Adjust.] in [Flash] in the [Rec] Menu.
(P237)
The [ ]/[Fn1] button can be used in two ways, as [ ] (exposure compensation) or
[Fn1] (function 1). At the time of purchase, the button is set to [ ].
• For details on the function buttons, refer to P70 .
1
Press [ ].
2
Rotate the rear dial to compensate the
exposure.
A Exposure Compensation value
B Flash Adjust
Underexposed Properly exposed Overexposed
Compensate the exposure
towards positive. Compensate the exposure
towards negative.
Fn1
+1 +1 +2 +2 +3 +3 +4 +4 +5 +5 -5 -5 -4 -4 -3 -3 -2 -2 -1 -1 00
0 0 0 +5 +5 +5
+1 +1
0
B A