Panasonic Lumix GX8 User Manual
Page 235
235
8. Stabilizer, Zoom and Flash
•
Press [DISP.] to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
[External
Flash]
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]:
Flash output is set by the external flash.
[MANUAL]:
Set the luminosity ratio of the external flash manually.
[OFF]:
The flash on the camera side emits only communication light.
[Flash Adjust.]
Set the flash output of the camera manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]:
The wireless flashes automatically set the output.
[MANUAL]:
Set the luminosity ratio of the wireless flashes manually.
[OFF]:
The wireless flashes of the specified group will not fire.
[Flash Adjust.]
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
B
C
A