Panasonic Lumix GX80 - Manual (Page 76)

76
SQT1310 (ENG)
Others
∫ General tips for using a Wi-Fi connection
•
Use within the communication range of the device to be connected.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz
frequency operated nearby?
> Radio waves may get interrupted when used simultaneously. Use them sufficiently
away from the device.
• When the battery indicator is flashing red, the connection with other equipment may not
start or the connection may be disrupted.
(A message such as [Communication error] is displayed.)
• If you place the camera on a metal table or shelf, the radio waves may be adversely
affected. In such cases, you may not be able to establish a connection. Move the
camera away from the metal surface.
∫ About a wireless access point
•
Check if the wireless access point to connect is in operating state.
• Check the radio wave condition of the wireless access point.
> Move this unit closer to the wireless access point.
> Change the location and orientation of the wireless access point.
• It may not display even if the radio waves exist depending on the setting of the wireless
access point.
> Check the settings of the wireless access point.
> When the network SSID of the wireless access point is set not to broadcast, the
wireless access point may not be detected. Enter the network SSID to start the
connection or enable the SSID broadcast of the wireless access point.
• Some OS versions, including Windows 8, use two types of accounts: a local account
and a Microsoft account.
> Be sure to use the user name and password for the local account.
If you haven’t set up a local account, please create one.
A Wi-Fi connection cannot be established.
Radio waves get disconnected.
Wireless access point is not displayed.
When I try to set up a Wi-Fi connection with a Windows 8 PC, my user
name and password are not recognized, so I cannot connect to the PC.
DMC-GX85KBody_PP-SQT1310_eng.book 76 ページ ２０１６年３月２５日 金曜日 午後５時１３分