Single bracket [87, Single bracket – Sony Cyber-shot DSC-RX100 IV User Manual

Page 103

Advertising
background image

1.0 EV.

Cont. Bracket: 1.0EV 9 Image:

This setting shoots nine images continuously with an exposure value shifted by plus or

minus 1.0 EV.

Cont. Bracket: 2.0EV 3 Image:

This setting shoots three images continuously with an exposure value shifted by plus or

minus 2.0 EV.

Cont. Bracket: 2.0EV 5 Image:

This setting shoots five images continuously with an exposure value shifted by plus or minus

2.0 EV.

Cont. Bracket: 3.0EV 3 Image:

This setting shoots three images continuously with an exposure value shifted by plus or

minus 3.0 EV.

Cont. Bracket: 3.0EV 5 Image:

This setting shoots five images continuously with an exposure value shifted by plus or minus

3.0 EV.

Note

The last shot is shown on the Auto Review.

When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by

adjusting the ISO value. If a setting other than [ISO AUTO] is selected, the exposure is

changed by adjusting the shutter speed.

When you adjust the exposure, the exposure is shifted based on the compensated value.

Bracket shooting is unavailable in the following situations:

The shooting mode is set to [Intelligent Auto], [Superior Auto], [Scene Selection], or [Sweep

Panorama].

When the flash is used, the product performs flash bracket shooting, which shifts the

amount of flash light even if [Cont. Bracket] is selected. Press the shutter button for each

image.

[87] How to Use

Using shooting functions

Selecting a drive mode (Continuous

shooting/Self-timer)

Single Bracket

Shoots multiple images while automatically shifting the exposure from base to darker and

then to lighter. Press the shutter button for each image. You can select an image that suits

your purpose after recording.

Advertising