Sony Cyber-shot DSC-RX100 IV - Manual (Page 176)

[182] How to Use Changing settings Setup menu
Demo Mode
The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time. Normally select
[Off].
1. MENU
→
(Setup
) → [Demo Mode] → desired setting.
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for
about one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded
date and time.
Off:
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC Adaptor (supplied).
Even if [On] is selected, the product does not start a demonstration if there is no movie file
on the memory card.
When [On] is selected, the product does not switch to power save mode.
[183] How to Use Changing settings Setup menu
TC/UB Settings
The time code (TC) and the user bit (UB) information can be recorded as data attached to
movies.
1.
MENU →
(Setup
) → [TC/UB Settings] → setting value you want to change.
Menu item details
TC/UB Disp. Setting: