Sony Cyber-shot DSC-RX100 IV - Manual (Page 204)

[221] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions
Access Point Set.
You can register your access point manually. Before starting the procedure, check the SSID
name of the access point, security system, and password. The password may be preset in
some devices. For details, see the access point operating instructions, or consult the access
point administrator.
1. MENU
→
(Wireless
) → [Access Point Set.].
2. Select the access point you want to register.
When the desired access point is displayed on the screen: Select the
desired access point.
When the desired access point is not displayed on the screen: Select
[Manual Setting] and set the access point.
*
For the input method, refer to “How to use the keyboard.”
If you select [Manual Setting], input the SSID name of the access point, then select
the security system.
3. Input the password, and select [OK].
Access points without the mark do not require a password.
4. Select [OK].
How to use the keyboard