Removing the battery pack [13, Inserting a memory card [14, Removing the battery pack – Sony Cyber-shot DSC-RX100 IV User Manual

Page 36

Advertising
background image

may be damaged.

As long as the power is on, the battery pack will not be charged even if the camera is

connected to the AC Adaptor.

Under certain conditions, power may be supplied from the battery pack supplementarily

even if you are using the AC adaptor.

Do not remove the Micro USB cable while power is supplied from a wall outlet (wall

socket). Before you remove the Micro USB cable, turn off the camera.

Depending on the camera and battery temperature, the continuous recording time may be

shortened while power is supplied from a wall outlet (wall socket).

When using a mobile charger as a power source, confirm that it is fully charged before

use. Also, be careful of the remaining power on the mobile charger during use.

[13] How to Use

Preparing the camera

Charging the battery pack

Removing the battery pack

How to remove the battery pack

1. Make sure that the access lamp is not lit, and turn off the camera.

2. Slide lock lever

(A) and remove the battery pack.

Be careful not to drop the battery pack.

[14] How to Use

Preparing the camera

Inserting a memory card (sold separately)

Inserting a memory card

How to insert a memory card

1. Open the memory card cover.

Advertising