Flash comp. [49, Switching the screen display (shooting) [50, Flash comp – Sony Cyber-shot DSC-RX100 IV User Manual

Page 73

Advertising
background image

Fill-flash:

The flash works every time you trigger the shutter.

Slow Sync.:

The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a

clear image of both the subject and the background by slowing the shutter speed.

Rear Sync.:

The flash works right before the exposure is completed every time you trigger the shutter.

Rear sync shooting allows you to shoot a natural image of the trail of a moving subject such

as a moving car or a walking person.

Note

The default setting depends on the shooting mode.

Available flash mode depends on the shooting mode.

[49] How to Use

Using shooting functions

Using the flash

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.

Flash compensation changes the amount of flash light only. Exposure compensation

changes the amount of flash light along with the change of the shutter speed and aperture.

1. MENU

(Camera Settings)

→ [Flash Comp.] → desired setting.

Selecting higher values (+ side) makes the flash level higher, and lower values (– side)

makes the flash level lower.

Note

[Flash Comp.] does not work when the shooting mode is set to the following modes:

[Intelligent Auto]

[Superior Auto]

[Sweep Panorama]

[Scene Selection]

The higher flash effect may not be visible due to the limited amount of flash light

available, if the subject is outside the maximum range of the flash. If the subject is very

close, the lower flash effect may not be visible.

Advertising