Sony Cyber-shot RX10 III - Manual (Page 215)

Before you touch the smartphone, cancel the sleep and lock-screen functions of the
smartphone.
The NFC function is available only when the (N mark) is displayed on the
product.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
To transfer two or more images, select MENU →
(Wireless)
→ [Send to
Smartphone] to select images. After the connection enabled screen appears, use
NFC to connect the product and the smartphone.
About “NFC”
NFC is a technology that enables short-range wireless communication between various
devices, such as mobile phones or IC tags, etc. NFC makes data communication simpler
with just a touch on the designated touch-point.
NFC (Near Field Communication) is an international standard of short-range wireless
communication technology.
Note
You can select an image size to be sent to the smartphone from [Original], [2M], or
[VGA].
To change the image size, refer to the following steps.
Start PlayMemories Mobile, and change the image size by [Settings]
→ [Copy Image Size].
RAW images are converted to JPEG format when they are sent.
If the Image Index is displayed on the product, you cannot transfer images using the NFC
function.
If you cannot make a connection, perform the following:
Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward
the (N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Confirm that the NFC function is activated on the smartphone.
When [Airplane Mode] is set to [On], you cannot connect the product and the
smartphone. Set [Airplane Mode] to [Off].
You cannot send AVCHD format movies.
You cannot send XAVC S format movies.
When you save images to a Mac computer using the Wi-Fi function, use “Wireless Auto
Import.”
[239] How to Use Using Wi-Fi functions Transferring images to a computer