Sony Cyber-shot RX10 III - Manual (Page 260)

[317] Troubleshooting Troubleshooting Shooting still images/movies
[Finder/Monitor Sel.] does not work even though it has
been assigned to a certain key using [Custom
Key(Shoot.)] or [Custom Key(PB)].
[FINDER/MONITOR] is currently set to [Auto]. Set [FINDER/MONITOR] to
[Viewfinder(Manual)] or [Monitor(Manual)].
[318] Troubleshooting Troubleshooting Shooting still images/movies
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
When pointing the lens toward the strong light source, excessive light enters the lens and
the image may come out white (flare) or extraneous light (ghost images) may appear on
the image, but this is not a malfunction.
Set up the composition so that you shoot images while avoiding backlit condition.
[319] Troubleshooting Troubleshooting Shooting still images/movies
The color tones of the image displayed on the
monitor/the viewfinder look unnatural.
[Gamma Disp. Assist] has been activated. Set [Gamma Disp. Assist] to [Off].
[Gamma Disp. Assist] is not working properly. The [Picture Profile] settings are cancelled
when you select other than [Off] for [Picture Effect], even if [Gamma] is set to [S-Log2].
Therefore, the color tones are not displayed correctly when [Gamma Disp. Assist] is set to
[Auto]. To display the color tones properly, set [Gamma Disp. Assist] to [Off].
[320] Troubleshooting Troubleshooting Shooting still images/movies
The image is blurred.