Sony Cyber-shot RX10 III - Manual (Page 43)

Setting language, date and time
When you turn on the camera for the first time or after you have initialized the functions, the
setting screen for language, date and time will appear.
1. Turn on the camera.
The language setting screen will appear and then setting screen for date and time will
appear.
2. Select your language, and then press .
3. Check that [Enter] is selected on the screen, then press on the control wheel.
4. Select your desired geographic location, and then press .
5. Select a setting item using the up/down side of the control wheel or by turning the
control wheel, then press in the center.
6. Set [Daylight Savings], [Date/Time], and [Date Format] using the up/down/left/right
sides, then press in the center.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
7. Repeat steps 5 and 6 to set other items, then select [Enter] and press in the center.
To cancel the date and time setting procedure, press the MENU button.
Note
If the date and time setting is cancelled halfway, the setting screen for the date and time
appears every time you turn on the camera.
[20] How to Use Confirming the operation method Confirming the operation method
Using the control wheel
You can select setting items by turning or pressing the top/bottom/right/left side of the control