Switching the screen display (shooting) [57, Switching the screen display (shooting) – Sony Cyber-shot RX10 III User Manual
Page 79
Advertising
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject is very
close, the lower flash effect may not be visible.
[57] How to Use
Using shooting functions
Selecting a screen display mode
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes.
Graphic Display
Display All Info.
No Disp. Info.
Histogram
Advertising