Recall, Press the center of the control wheel to confirm – Sony Alpha 9 User Manual

Page 103

Advertising
background image

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08

ILCE-9
4-692-676-11 (2)

GB

103

Shoo

ting

Note

• The longer the exposure time, the more noise will be visible on the image.

• After shooting, noise reduction will be done for the same amount of time

that the shutter was open. However, you cannot shoot any more while noise
reduction is in progress.

• You cannot set the shutter speed to [BULB] in the following situations:

– [Auto HDR]

– [Picture Effect] is set to [Rich-tone Mono.]

– When [Drive Mode] is set to the following:

– [Cont. Shooting]

– [Self-timer (Cont)]

– [Cont. Bracket]

– [

 Shutter Type] is set to [Electronic Shut.]

If you use the above functions when the shutter speed is set to [BULB], the
shutter speed is temporarily set to 30 seconds.

• If you set [Drive Mode] to [Cont. Shooting] and [

 Shutter Type] to [Auto] or

[Electronic Shut.] when the shutter speed is set to [BULB], the shutter speed
will be temporarily set to 1/8 seconds.

/

Recall

Allows you to shoot an image after recalling often-used modes or camera
settings registered with [

/

 Memory] in advance.

1

Set the mode dial to 1, 2, or 3 (Memory recall).

2

Press the center of the control wheel to confirm.

• You can also recall registered modes or settings by selecting MENU

 (Camera Settings 1)

 [

/

 Recall].

Advertising