Sony Alpha 9 - Manual (Page 140)

ILCE-9
4-692-676-11 (2)
C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\040MOV.indd
2017/03/15 14:08
GB
140
• The following settings for still image shooting are applied to the movie
shooting:
– White Balance
– Creative Style
– Metering Mode
– Face Detection
– D-Range Opt.
– Lens Comp.
• You can change the settings for ISO sensitivity, exposure compensation, and
focus area while shooting movies.
• While shooting movies, the recorded image can be output without the
shooting information display by setting [HDMI Info. Display] to [Off].
Note
• The sound of the lens and the product in operation may be recorded
during movie recording. You can turn the sound off by selecting MENU 
(Camera Settings 2)  [Audio Recording]  [Off].
• When shooting, the sound of the shoulder strap hooks (triangular hook) could
be recorded, depending on the situation used.
• To prevent the operating sound of the zoom ring from being recorded during
movie recording when a power zoom lens is used, we recommend recording
movies using the zoom lever. When you move the zoom lever, place your
finger lightly on the lever and operate it without flicking.
• The temperature of the camera tends to rise when shooting movies
continuously, and you may feel that the camera is hot. This is not a
malfunction.
Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the
camera off and wait until the camera is ready to shoot again.
• When the icon appears, the temperature of the camera is too high.
• For the continuous shooting time of a movie recording, refer to “Recordable
movie times” (page 249). When movie recording is finished, you can restart
recording by pressing the MOVIE button again. Recording may stop to protect
the product, depending on the temperature of the product or the battery.
• When the mode dial is set to (Movie) or or when shooting movies,
you cannot select [Lock-on AF] for [Focus Area].
• In [Program Auto] mode when shooting movies, the aperture value and the
shutter speed will be set automatically and cannot be changed. For that
reason, the shutter speed may become fast in a bright environment, and the
motion of the subject may not record smoothly. By changing the exposure
mode and adjusting the aperture value and the shutter speed, the motion of
the subject can be recorded smoothly.