Commander mode – Nikon D5500 User Manual

Page 284

Advertising
background image

260

A Custom Settings: Fine-Tuning Camera Settings

❚❚ Commander Mode

When an optional SB-500 flash unit is mounted on the accessory
shoe, select Commander mode to use the SB-500 as a master
flash controlling one or more remote optional flash units in up to
two groups (A and B) using advanced wireless lighting (

0 325).

Selecting this option displays the menu
shown at right. Press

4 or 2 to highlight

the following options,

1 or 3 to change.

A

TTL Flash Control

The following types of flash control are supported when a CPU lens is
used in combination with the built-in flash (

0 93) or optional flash

units (

0 323).

• i-TTL Balanced Fill-Flash for Digital SLR: Information from the 2016-pixel

RGB sensor is used to adjust flash output for a natural balance
between the main subject and the background.

• Standard i-TTL Fill-Flash for Digital SLR: Flash output is adjusted for the

main subject; the brightness of the background is not taken into
account.

Standard i-TTL flash control is used with spot metering or when
selected with the optional flash unit. i-TTL balanced fill-flash for digital
SLR is used in all other cases.

Advertising