Sharp MX-6070N - Manual (Page 122)

1-119
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SUPPLIES
The finisher (large stacker) requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SC11
FINISHER (LARGE STACKER) MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the front cover.
2
Remove the staple case.
3
Remove the empty staple cartridge.