Sharp MX-6070N - Manual (Page 207)

2-43
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Staple ON (excluding booklet)
1
Tap the [Staple / Punch] key.
► COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Select the number of staples and
staple position.
• After the settings are completed, tap .
• A binding position cannot be selected for stapleless
stapling.
In normal mode
• Tap the [Staple Sort] key.
• If you need to change the output tray, tap the [Output Tray] key and select the output destination before selecting
stapling.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap [Continue] or [Cancel].
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
CA
Preview
B/W
Start Colour
Start Copies
Staple / Punch
Staple
Off
Off
Position
Punch
Preview
Start
Staple Sort
Others
No. of copies
Put Multiple Pages in A Page
Sort/Group
Change Sort/Group
N-Up
Punch Holes
Punch
Change Size/Direction.
Original
Colour
Start
1
Offset
Original
Right
Up
Left
Staple Position
2 Staples
Stapleless Staple
1 Staple
Off
Colour Mode
CA
B/W
Output Tray