Receiving a fax after answering a, Making and receiving phone calls -123, Making and receiving phone calls – Sharp MX-6070N User Manual

Page 526

Advertising
background image

4-123

FACSIMILE►USING AN EXTERNAL TELEPHONE

RECEIVING A FAX AFTER ANSWERING A CALL ON

THE EXTENSION TELEPHONE (REMOTE RECEPTION)

Follow the steps below if you need to start fax reception after answering a call and speaking on the extension telephone.
Dial [5], [*] and [*] buttons of the external telephone.
If you are using a pulse line, set the extension to send tone signals.

MAKING AND RECEIVING PHONE CALLS

You can make and receive calls like normal on your extension phone. A phone call can also be made by dialling on the
machine.

If the extension phone is still lifted when fax transmission ends, an alarm signal will sound and a message will appear in the
touch panel. The alarm and message will stop when the extension phone is replaced.

To receive a fax after answering a call on the extension telephone:

Set "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Fax Data Receive/Forward (Manual)] →
[Fax Settings] → [Receive Settings] to [Manual Reception].

To change the number to receive faxes:

In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Remote
Reception Number Setting].

1

While the machine is ringing, pick up
the receiver to speak.

2

Signal the machine to start fax
reception.

Press

from the extension telephone.

3

Replace the receiver.

The machine beeps when reception ends.

Advertising
This manual is related to the following products: