Forwarding received data manually -139, Forwarding received data manually – Sharp MX-6070N User Manual

Page 668

Advertising
background image

5-139

SCANNER/INTERNET FAX►INTERNET FAX RECEPTION FUNCTIONS

FORWARDING RECEIVED DATA MANUALLY

Received faxes can be forwarded manually after receipt.
This function is available when [System Settings] → [Image Send Settings] → [Common Settings] → [Condition
Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled* in "Settings (administrator)".
* The factory default setting is disabled.
When data is received,

is shown at the top of the screen.

1

In the System Information, tap the
[Event Information] tab and tap the
[Check Fax Reception Image] key.

The received data is listed.

You can also display the received data list by tapping the job status display and tapping [Check Received Data] on the
action panel of Job Status screen.

2

Tap the key of the received data you
wish to forward, and tap [Forward to
Other Address].

• Tap

to show thumbnails of received images

(Thumbnail screen). The list view or thumbnails view can
be changed depending on the setting mode.

• Multiple sets of received data can be selected.

When you select a single received data only, you can tap [Check Image] on the action panel and check the image on the
preview screen.

3

Select the destination from the Address Book screen, and tap the [Start] key.

System Information

Check Fax
Reception Image

Check Confidential
Received Data

Check Error Box

Release Held
Received Data

Terminate
Remote Operation

Fax Receive

Event Information

Maintenance Information

Toner Remaining

Select External Application

Exit

Forward to Other Address

Check Image

Print

All Received Data

Received Data List

Cancel All

Delete

File

Store Data in Folder

Advertising
This manual is related to the following products: