Other functions, Cautionary points, Eraser – Sharp PN-60TW3 User Manual

Page 24: Touch action

Advertising
background image

24

E

Touch action

Rotation
Use this action in a screen that is capable of image rotation.

Touch the center point of the rotation with one finger. While

holding that finger still, move another finger in the desired

direction of rotation.

With one finger touching

Move another finger in the

desired direction of rotation

TIPS

• The screen may not respond correctly in the following cases:

Touch gesture is too quick
The distance between the two points is too short
The two points intersect

Other functions

In Windows 8/8.1/10, input panel functions can be used.

In Windows 7, touch pointer and input panel functions can be

used.

For information on these functions, see Windows Help.

Touch pointer :

A translucent image of a mouse appears near the point

touched. The left/right buttons of the image can be clicked

to perform the same actions as left/right clicking a mouse.
Input panel :

A software keyboard and an input panel with handwriting

recognition appear on the screen.

Windows 8/8.1/10 and Windows 7 (excluding Starter), the ink

function of Microsoft Office can be used.

Handwritten comments can be written, and handwriting can

be recognized.

For details, see Microsoft Office Help.

Cautionary points

• Do not use the touch pen for any purpose other than touch

panel operation.

• Do not press hard on the pen tip.

• Operation will not take place correctly if there is an obstacle

between the infrared transmitter/receiver and the touch pen

or your finger. Operation will not take place correctly if your

fingers or your sleeve is near the screen.

• If the touch pen is held too flat against the screen, the

touch position may not be correctly detected.

• If the touch pen does not work at the edge of the screen,

move it slowly.

• This may not operate correctly if there is an inverter

fluorescent light nearby.

• Do not store with the pen tip of the touch pen or function

button pressed. The battery will be exhausted.

• If there is dirt or foreign matter on the tip of the touch pen,

remove it. Foreign matter may damage the screen.

• The touch pen position may occasionally deviate in the

login screen. In this case, use the keyboard or mouse.

• If the USB cable becomes disconnected, the touch

panel may not operate correctly after the USB cable is

reconnected. In this case, restart the computer.

Eraser

The eraser is used with the Pen Software and Direct Drawing.

For the procedure for using the eraser, refer to the Pen

Software Operation Manual or Wireless Controller Operation

Manual.

Caution

• When using the eraser, gently bring the cloth side into

contact with the screen. Touching the screen with one of

the non-cloth sides will damage the screen.

• If there is any dirt or foreign matter on the surface that contacts

the screen, remove it. Foreign matter may damage the screen.

Advertising
This manual is related to the following products: