Sharp PN-60TW3 - Manual (Page 25)

25
E
Basic Operation
Using the touch menu
You can touch the monitor to change input mode, volume, and
other settings.
1. Press the TOUCH MENU button.
TOUCH MENU button
2. Touch the screen to change settings.
INPUT
Direct Drawing
SIDE INPUT TERMINAL
BOTTOM INPUT TERMINAL
Wireless
D-SUB2
HDMI2
HDMI3
D-SUB1
DisplayPort
HDMI1
(4) (1) (2) (3)
(1) INPUT (Input mode selection)
Changes the input mode.
Input mode Video Audio
DisplayPort DisplayPort input terminal
*5
HDMI1 HDMI1 input terminal *1
HDMI2 HDMI2 input terminal *2
HDMI3 HDMI3 input terminal *3
D-SUB1 D-sub1 input terminal *4
D-SUB2 D-sub2 input terminal
Direct Drawing *6 Direct Drawing
Wireless *7 Wireless
• When the input mode is changed, the touch panel
connection also changes. You can set whether the side or
bottom USB port is used in each input mode. (See page
34.)
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT. (See page 33.)
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT. (See page 33.)
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT. (See page 33.)
*4 Select the terminal to be used in D-SUB1 of INPUT
SELECT. (See page 33.)
*5 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 33.)
*6 Select this to use the monitor as a whiteboard. For details,
see the Wireless Controller Operation Manual.
*7 Select this to display a computer by wireless. For details,
see the Wireless Controller Operation Manual.
(2) Volume adjustment
Changes the volume.
15
Mutes the sound.
Touch again to return the sound to the original
volume.
Increases the volume.
Decreases the volume.