Sharp PN-60TW3 - Manual (Page 33)

33
E
Menu Items
n AUDIO
TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.
Select “ON” and then press ENTER .
n SETUP
DATE/TIME SETTING
Set the date and time. Press
or to select the date and time, and press or to change the numerical values.
Set the date in “Day/Month/Year” order.
Set the time on a 24-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE ..................MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
(YYYY: Year, MM: Month, DD: Day)
TIME ...................Select 12- or 24-hour time.
SCHEDULE (See page 39.)
You can turn the power on/off and change the screen brightness at a specified time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
HDMI1/HDMI2/HDMI3
Select the input mode to be used in HDMI1, HDMI2 and HDMI3 input terminals.
D-SUB1
Select the input mode to be used in D-Sub1 input terminal. Select SET after selecting the input mode, and then press ENTER .
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted automatically according to the screen size control signal included in the
video signal input from the AV HDMI input terminal.
HOT PLUG CONTROL
Sets whether to use hot plug control for the HDMI1, HDMI2, and HDMI3 input terminals.
INPUT MODE NAME
For each terminal, you can change the input mode name that is displayed during input mode selection and display.
The names of INPUT1 to INPUT6* can be changed. (*Factory default)
(1) Select the input mode name (INPUT1 to INPUT6) that you want to change, and press
ENTER .
If the input mode name can be changed, “EDIT … [ENTER]” will appear.
(2) Move the cursor to the character that you want to change with
, and change the character with .
Change the character type with MODE (upper case alphabet, lower case alphabet, numbers, symbols).
(3) When you have finished the change, press ENTER .
Up to 18 characters can be used.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.