Sharp PN-60TA3 - Manual (Page 2)

(5) Enter system password.
The monitor is automatically restarted in System
mode.
(4) Touch “System mode” on “System Settings” tab.
7.
Date and Time setting
(1) Touch “Date and Time” on “System Settings” tab.
(3) Touch “Change date and time...”
on “Date and Time” tab.
(2) Touch “Change time zone...”
on “Date and Time” tab.
Set date, time, and time zone.
Set the date and time.
Enter system password
Enter the password set in system password.
If a password is not set , enter “00000”