Multiple monitor connection, Connection with video cable, Connections ■ connection with rs-232 cable – Sharp PN-V602 User Manual

Page 8

Advertising
background image

6

E

Multiple monitor connection

[Example]

Second monitor

Secondary

(Expansion unit)

ID No.: 2

Third monitor

Secondary

(Expansion unit)

ID No.: 3

First monitor

Primary

(Main unit)

ID No.: 1

Fourth monitor

Secondary

(Expansion unit)

ID No.: 4

Remote control sensor box

(Supplied with the PN-ZR01 (optional))

* Always install the remote control sensor box on the primary

monitor.

■ Connection with video cable

May vary depending on the system being used.

If using the PC/AV DVI-D terminal, up to 5 monitors can be

connected in a daisy chain. (When the PN-ZB02 is attached)

shows the

signal flow

PC/AV DVI-D

input terminal

First monitor

Second monitor

PC/AV DVI-D

output terminal

PC/AV DVI-D

input terminal

Digital signal (DVI) cables

(commercially available)

To PC digital RGB output terminal

Connections

■ Connection with RS-232 cable

If you connect the monitor in a daisy chain using RS-232

cable, using the monitor buttons on the primary (main unit),

settings are copied to the secondary (expansion unit) and

operation from the primary can perform operation for all

monitors. Setting each ID No. in the monitor is required.

The first monitor will be set as primary (main unit) and the

second monitor and beyond will be secondaries (expansion

units).

Connect the RS-232C cables in order, starting with the first

monitor (primary monitor). If monitors are connected in a

different order they may not be operable.

RS-232 straight cable

(commercially available)

First monitor: primary Second monitor: secondary

Third monitor: connects to secondary

RS-232C input terminal

RS-232C

input terminal

RS-232C

output terminal

RS-232C

output terminal

Connect the third monitor and other monitors in the same

manner.

Up to 25 monitors can be connected. (Depending on the

length of the cable used and the surrounding environment.)

ID Number is set with the primary monitor’s buttons. If you set

AUTO ASSIGN ID No., located in the menu of the monitor to

ON, the ID No. will be automatically assigned in order from the

primary.

Advertising