Menu items – Sharp PN-V602 User Manual

Page 25

Advertising
background image

E

25

Menu Items

COPY SETTING VALUE
When the monitor has been connected to multiple monitors

with RS-232C, you can copy the primary setting details to

the secondary. Perform operations with the primary monitor.

Selects the settings to copy with COPY SETTING VALUE

TARGET.

“PICTURE” ONLY ... Copies the PICTURE menu settings.*

ALL ........................ Copies all the settings.*

Select the ID No. of the monitor that you would like copy to
with COPY TO ID No., then select COPY and press

MENU

.

If you select ALL, settings will be copied to all monitors.

When you would like to confirm the ID No. that is set to the
monitor, select ID No. and press

. The ID No. will be

displayed on the screen.

* Certain setting details such as ANALOG GAIN, ANALOG

OFFSET, and DISPLAY COLOR PATTERN cannot be

copied.

LOGO SCREEN
Sets whether or not to display the logo screen.

BAUD RATE
Selects the communication speed used for RS-232C

communication.
LAN SETUP
Configures the settings to control the monitor from the

computer via LAN. (See page 45.)
AUTO ASSIGN FIXED IP ADDR.
Can be enabled when RS-232C/LAN SELECT is LAN and

the DHCP CLIENT is OFF.

Set the DHCP CLIENT for secondary monitors connected

by RS-232C to OFF and a fixed IP address is automatically

allocated.

If the IP address is a duplicate with a network device other

than a monitor, individually change the IP address.
OPTION DC OUT SETTING
Normally, leave this setting as OFF.

When using an optional part, if instruction appears, change

the setting accordingly.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted

automatically according to the screen size control signal

included in the video signal input from the AV HDMI input

terminal.
BRIGHTNESS SENSOR

(When connected to the PN-ZR01 (optional) only)
When set to ON or ON: DISPLAY, the brightness will

automatically change according to the lighting and

surrounding brightness. Performs operation with the primary

monitor. If set to ON: DISPLAY, the effect will be displayed
with a

.

If connecting to multiple monitors, the brightness of all the

monitors will change.
The

will be displayed on the primary only.

When setting BRIGHT in SCHEDULE on the OPTION menu,

set BRIGHTNESS SENSOR to OFF.
BRIGHTNESS SENSOR SETTING

(When connected to the PN-ZR01 (optional) only)
Performs adjustments to the brightness sensor. Performs

operation with the primary monitor.

Set the surrounding brightness and the current screen

luminance to AMBIENT BRIGHTNESS and SCREEN

BRIGHTNESS.

Individually set WHEN LIGHT: and WHEN DARK:.

Even if brighter or darker than the set AMBIENT

BRIGHTNESS, the screen brightness will not change.

CURRENT AMBIENT BRIGHTNESS is shown for reference.

Advertising
This manual is related to the following products: