Tips and safety instructions – Sharp PN-V602 User Manual

Page 7

Advertising
background image

7

E

- The TFT color LCD panel used in this monitor is made with

the application of high precision technology. However, there

may be minute points on the screen where pixels never light

or are permanently lit. Also, if the screen is viewed from

an acute angle there may be uneven colors or brightness.

Please note that these are not malfunctions but common

phenomena of LCDs and will not affect the performance of

the monitor.

- Do not display a still picture for a long period, as this could

cause a residual image.

- Never rub or tap the monitor with hard objects.
- Please understand that SHARP CORPORATION bears no

responsibility for errors made during use by the customer or

a third party, nor for any other malfunctions or damage to this

product arising during use, except where indemnity liability is

recognized under law.

- This monitor and its accessories may be upgraded without

advance notice.

- Do not use the monitor where there is a lot of dust, where

humidity is high, or where the monitor may come into contact

with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into contact with

water or other fluids. Ensure that no objects such as paper

clips or pins enter the monitor as this could lead to fire or

electric shock.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong

shocks or to strongly vibrate. Causing the monitor to fall or

topple over may damage it.

- Do not use the monitor near heating equipment or in places

where there is likelihood of high temperature, as this may

lead to generation of excessive heat and outbreak of fire.

- Do not use the monitor in places where it may be exposed to

direct sunlight.

- If the monitor is installed in a location exposed to sunlight

such as next to a window, measures to reduce ultraviolet and

infrared radiation and temperature measures are required.

For details, consult your dealer.

- Please be sure to constantly remove dust and garbage that

has attached to the ventilation opening. If dust collects in the

ventilation opening, it may lead to excessive heat, outbreak

of fire, or malfunction.

As a standard, clean the inside of the monitor once every

year. If dust collects inside the monitor, it may lead to

excessive heat, outbreak of fire, or malfunction. Please

request a cleaning of the inside of the monitor from an

authorized SHARP servicing dealer or service center.

- Images cannot be rotated on this monitor.

When using in vertical orientation, you will need to prepare

appropriately orientated content in advance.

- The AC outlet shall be installed near the equipment and shall

be easily accessible.

The Power Cord

- Use only the power cord supplied with the monitor.
- Do not damage the power cord nor place heavy objects on

it, stretch it or over bend it. Also, do not add extension cords.

Damage to the cord may result in fire or electric shock.

- Do not use the power cord with a power tap.

Adding an extension cord may lead to fire as a result of

overheating.

- Do not remove or insert the power plug with wet hands.

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service

representative.

Manual Scope

- Microsoft, Windows and Internet Explorer are registered

trademarks of Microsoft Corporation.

- HDMI, the HDMI Logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

- Adobe, Acrobat, and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

- This product comes with RICOH Bitmap Fonts produced and

sold by RICOH COMPANY, LTD.

- All other brand and product names are trademarks or

registered trademarks of their respective holders.

- Language of OSD menu used in this manual is English by

way of example.

- Illustrations in this manual may not exactly represent the

actual product or display.

- This manual assumes use in landscape orientation, except

where specifically noted.

- This manual assumes that this product will be used with

the remote control unit buttons, except where specifically

noted. Operation by using the buttons on the rear side of the

product will perform the same functions.

Rear side buttons

Remote control

unit buttons

* For operation with the remote control unit, the PN-ZR01

control kit (optional) is required.

LED Backlight

● The LED backlight in this product has a limited lifetime.

* If the screen gets dark or does not turn on, it may be

necessary to replace the LED backlight. This LED

backlight is exclusive to this product and must be replaced

by an authorized Sharp servicing dealer or service center.

* Please contact your local Sharp servicing dealer or

service center for assistance.

Fan

● The fan in this product has a limited lifetime.

TIPS AND SAFETY INSTRUCTIONS

Advertising
This manual is related to the following products: