Sharp PN-U423 - Manual (Page 34)

34
E
RS-232C command table
How to read the command table
Command: Command field (See page 30.)
Direction: W When the “Parameter” is set in the parameter field (see page 30), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+”
(repeater control) in the parameter field (see page 30).
Parameter: Parameter field (See page 30.)
Reply: Response (Returned value)
* : “○” indicates a command which can be used in power standby mode.
“–” indicates a command which cannot be used in power standby mode.
(When STANDBY MODE is STANDARD. When set to LOW POWER, RS-232C commands cannot be used.)
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents *
POWER CONTROL POWR W 0 Switches to standby mode.
○
1 Returns from standby mode.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W 0 Toggle change for input mode.
1 DVI-D
2 D-SUB
3 COMPONENT
4 VIDEO
9 HDMI
14 DisplayPort
R 1 DVI-D
2 D-SUB
3 COMPONENT
4 VIDEO
9 HDMI
14 DisplayPort
SCREEN menu
Function Command Direction Parameter Reply Control/Response contents *
AUTO ASNC W 1 When the input mode is D-SUB. -
SELF ADJUST AADJ WR 0-1 0-1 0: OFF, 1: ON ○
CLOCK CLCK WR 0-100 0-100 When the input mode is D-SUB.
-
PHASE PHSE WR 0-100 0-100 When the input mode is D-SUB.
POSITIONING POSITION OF
THE LONGEST
DIRECTION HPOS WR 0-100 0-100 When the input mode is D-SUB.
POSITION OF
THE SHORTEST
DIRECTION VPOS WR 0-100 0-100 When the input mode is D-SUB.
SIZE (DVI-D, DisplayPort, D-SUB) WIDE WR 1-3,6 1-3,6 1: WIDE, 2: NORMAL, 3: Dot by Dot, 6: CUSTOM
SIZE (HDMI, COMPONENT, VIDEO) WIDE WR 1,4-6 1,4-6 1: WIDE, 4: NORMAL, 5: Dot by Dot, 6: CUSTOM
CUSTOM ZOOM ZOOM CZSZ WR 0-100 0-100
SIZE OF THE
LONGEST
DIRECTION
CZHS WR 0-100 0-100
SIZE OF THE
SHORTEST
DIRECTION
CZVS WR 0-100 0-100
POSITION OF
THE LONGEST
DIRECTION CZHP WR 0-100 0-100 When the input mode is D-SUB.
POSITION OF
THE SHORTEST
DIRECTION CZVP WR 0-100 0-100 When the input mode is D-SUB.
INPUT
RESOLUTION
(DVI-D, DisplayPort,
D-SUB)
RESOLUTION CHECK PXCK R - Returns current resolution in the form of hhh, vvv.
PIXEL SETTING
(D-SUB)
PXSL WR 1 1 768) 1360 x 768
2 2 768) 1280 x 768
3 3 768) 1024 x 768
7 7 1050) 1680 x 1050
8 8 1050) 1400 x 1050
9 9 768) AUTO
11 11 1200) 1920 x 1200
12 12 1200) 1600 x 1200
13 13 1050) AUTO
14 14 1200) AUTO
INPUT RESOLUTION
(HDMI, COMPONENT,
VIDEO)
RESOLUTION CHECK RESO R - 480i, 480p, 1080i, 720p, 1080p, etc.
RESET ARST W 1
Controlling the Monitor with a PC (RS-232C)