Tips and safety instructions – Sharp PN-U423 User Manual

Page 6

Advertising
background image

6

E

- The TFT color LCD panel used in this monitor is made with

the application of high precision technology. However, there

may be minute points on the screen where pixels never light

or are permanently lit. Also, if the screen is viewed from

an acute angle there may be uneven colors or brightness.

Please note that these are not malfunctions but common

phenomena of LCDs and will not affect the performance of

the monitor.

- Do not display a still picture for a long period, as this could

cause a residual image.

- Never rub or tap the monitor with hard objects.
- Please understand that SHARP CORPORATION bears no

responsibility for errors made during use by the customer or

a third party, nor for any other malfunctions or damage to this

product arising during use, except where indemnity liability is

recognized under law.

- This monitor and its accessories may be upgraded without

advance notice.

- Do not use the monitor where there is a lot of dust, where

humidity is high, or where the monitor may come into contact

with oil or steam. Do not use in an environment where

there are corrosive gases (sulfur dioxide, hydrogen sulfide,

nitrogen dioxide, chlorine, ammonia, ozone, etc.). As this

could lead to fire.

- Ensure that the monitor does not come into contact with

water or other fluids. Ensure that no objects such as paper

clips or pins enter the monitor as this could lead to fire or

electric shock.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong

shocks or to strongly vibrate. Causing the monitor to fall or

topple over may damage it.

- Do not use the monitor near heating equipment or in places

where there is likelihood of high temperature, as this may

lead to generation of excessive heat and outbreak of fire.

- Do not use the monitor in places where it may be exposed to

direct sunlight.

- Please be sure to constantly remove dust and garbage that

has attached to the ventilation opening. If dust collects in the

ventilation opening or the inside of the monitor, it may lead to

excessive heat, outbreak of fire, or malfunction.

Please request a cleaning of the inside of the monitor from

an authorized SHARP servicing dealer or service center.

- Images cannot be rotated on this monitor.

When using in portrait orientation, you will need to prepare

appropriately orientated content in advance.

- The AC outlet shall be installed near the equipment and shall

be easily accessible.

The Power Cord

- Use only the power cord supplied with the monitor.
- Do not damage the power cord nor place heavy objects on

it, stretch it or over bend it. Also, do not add extension cords.

Damage to the cord may result in fire or electric shock.

- Do not use the power cord with a power tap.

Adding an extension cord may lead to fire as a result of

overheating.

- Do not remove or insert the power plug with wet hands.

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service

representative.

Manual Scope

- Microsoft, Windows and Internet Explorer are registered

trademarks of Microsoft Corporation.

- The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and

other countries.

- DisplayPort is a registered trademark of Video Electronics

Standards Association.

- Adobe, Acrobat, and Reader are either registered trademarks

or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

- This product comes with RICOH Bitmap Fonts produced and

sold by RICOH COMPANY, LTD.

- All other brand and product names are trademarks or

registered trademarks of their respective holders.

- Language of OSD menu used in this manual is English by

way of example.

- Illustrations in this manual may not exactly represent the

actual product or display.

- This manual assumes use in landscape orientation, except

where specifically noted.

LED Backlight

● The LED backlight in this product has a limited lifetime.

* If the screen gets dark or does not turn on, it may be

necessary to replace the LED backlight.

* This LED backlight is exclusive to this product and must

be replaced by an authorized SHARP servicing dealer

or service center. Please contact an authorized SHARP

servicing dealer or service center for assistance.

TIPS AND SAFETY INSTRUCTIONS

Advertising
This manual is related to the following products: