eMachines 8513152 - Manual (Page 85)

www.emachines.com
79
Power
Your computer will not turn on
• Make sure that the power cord is connected to an
AC power source and to your computer, and that your
computer is turned on. If your power cables are
connected to a power strip, make sure it is turned on.
• Test the outlet by plugging in a working device, such as
a lamp.
• Make sure that the power cord is free from cuts or
damage, and r eplace any damaged cables.
Display
The screen resolution is not correct
• Change the screen resolution in Windows. For
instructions, see your online User Guide.
The computer is on, but there is no picture
• Make sure that the computer is not in Standby
(power-saving) mode.
• Make sure that the monitor is connected to a power
outlet and to a video port on your computer, then make
sure that the monitor is turned on. If the monitor is on,
its power LED should be on.
• Adjust the monitor’s brightness and contrast controls.
For more information, see the monitor’s documentation.
• Check the video cable for bent or damaged pins.
• Connect a display that you know works (such as a
monitor from another computer) to your computer. If the
display still works, the original monitor is faulty. If the
display does not work, the computer’s video card (if
installed) is faulty.
8513152.book Page 79 Wednesday, May 14, 2008 4:57 PM