Epson EMP-1715/1710 - Manual (Page 33)

List of Functions 33
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
Sub Menu Function
Auto Setup You can select whether, when the input signal changes, the image is automatically adjusted to the optimum state (On) or not (Off). s p.48
Tracking g You can adjust computer images when vertical stripes appear in the images. s p.48
Sync. g You can adjust computer images when flickering, fuzziness, or interference appear in the images. s p.48
Position You can adjust the display position up, down, left, and right when a part of the image is missing so that all of the image is projected.
Progressive g (Component video can only be adjusted when 525i/625i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
On: interlace
g (i) signals are converted into progressive g (p) signals. This is ideal for viewing still images.
Computer Input You can select the input signal from Computer (Component Video) port.
If set to "Auto" the input signal is set automatically according to the connected equipment.
If colours do not appear correctly when set to "Auto", select the appropriate signal according to the connected equipment.
Video Signal If set to "Auto", video signals are recognized automatically. If interference appears in the image or a problem occurs such as no image is being
projected when set to "Auto", select the appropriate signal according to the connected equipment.
Resize You can set the aspect ratio g for projected images. s p.17
Reset You can reset all adjustment values on the "Signal" menu to their default settings, except for "Computer Input".
To return all menu items to their default settings, see s
p.39
Computer image Component video
g
Composite video
g
/S-video
g