Epson EMP-1715/1710 - Manual (Page 64)

64 Optional Accessories and Consumables
The following list of optional accessories is current as of July, 2006.
Details of accessories are subject to change without notice and
availability may vary depending on the country of purchase.
f Optional accessories
* A special method of installation is required to suspend the projector from a
ceiling. Contact your dealer or the nearest address provided in the World-Wide
Warranty Terms if you want to use this installation method. s
Inquiries
f Consumables
Soft carrying case ELPKS16B
Use this case if you need to travel with the projector.
60" portable screen ELPSC07
80" portable screen ELPSC08
100" screen ELPSC10
Portable roll-type screens (Aspect ratio
g 4:3)
50" portable screen ELPSC06
A compact screen that can be carried easily. (Aspect ratio 4:3)
HD-15 cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
This is the same as the computer cable supplied with the projector.
HD-15 cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
HD-15 PC cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Use one of these longer cables if the computer cable supplied with the projector is
too short.
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male^3)
Use to connect a component video
g source
Ethernet unit ELPAP02
Use this when connecting to a network by using a LAN cable.
Ceiling plate * ELPFC03
Ceiling pipe (370 mm (14.57 in.)/silver) * ELPFP04
Ceiling pipe (570 mm (22.44 in.)/silver) * ELPFP05
Ceiling pipe (770 mm (30.31 in.)/silver) * ELPFP06
Use when installing the projector on a high ceiling.
Ceiling mount * ELPMB18
Use when installing the projector on a ceiling.
Lamp unit ELPLP38
Use as a replacement for used lamps.
Air filter (by 2) ELPAF08
Use as a replacement for used air filters.