Elite Screens 71120 - Manual (Page 2)

Installation
- 2 - www.elitescreens.com [email protected]
1. Mark the location of where the screen is to be installed and drill your holes.
2. Insert the proper screw and leave about 1/8” of an inch from the wall to mount the screen.
3. Mount your screen from the keyhole located on back of the screen’s left and right end cap.
Flush Mount to the Wall
(Hardware not included)
You can also hang the screen on a ceiling by using a chain (not included) and hang it by the two loops
(models 71‐120) located on each end of the case or by the ears of the end caps (models 135‐170).
Suspended Ceiling using Chains
(Hardware not included)
Back of end cap
Front view
Side view
71"-120" 135"-170"
Loops
Hole