Elite Screens 71120 - Manual (Page 3)

1. Pull the screen down from the lanyard or from the handle only in a 90‐degree angle. Do not attempt to
pull the screen down by the surface, as it will damage the screen and void the warranty.
2. To retract the screen back into its case, simply pull the screen down more than 2 inches and let the
screen retract by quickly and gently releasing it up.
Screen Operation & Maintenance
Note: Always pull the screen down or retract in a 90‐degree vertical angle. To avoid damaging the
viewing surface, do not allow the viewing material to touch the screen case when deploying or
retracting the unit.
Note: The interval auto‐lock mechanism system will cause the screen to stop and lock on the position
at intervals.
Note: Always release the screen at a 90‐degree angle and do not let go until the screen is entirely
inside the case. Keep in mind the screen’s mechanism is new and needs to be deployed/retracted a
few times to loosen up. If the screen feels stuck, carefully, with a little force, yank the screen straight
down to unlock the unit.
Note:
Improper pulling on the screen to deploy/retract will damage material and/or the rolling system.
To clean the viewing material, use a soft cloth with mild soap and water. In order to keep the viewing surface
clean, it is recommended to keep the screen retracted into its housing case when not in use.
Maintenance
- 3 - www.elitescreens.com [email protected]