Enterasys Networks Enterasys Gold Distributed Forwarding Engine 4H4284-49 - Manual (Page 58)

Completing the Installation
3-28 Installation
Completing the Installation of a DFE-Gold Module in an Existing
System
In an established DFE‐Gold module system,
• a DFE‐Gold module is already established as the management module,
• the passwords have already been set for various users,
• the system IP address is set, and
• other system parameters have been set.
When you install a new DFE‐Gold module into a system with an existing configured user
account, the current system settings in that account are already recognized by the new
DFE‐Gold module and it will operate accordingly.
If you need to change any settings, you can connect a terminal to the local console port as
described in
“Connecting to COM Port for Local Management” on page 3‐20 to access
system management, or use a Telnet connection to access the DFE‐Gold module system
management as described in Chapter 3 of the Enterasys Matrix DFE‐Gold Series
Configuration Guide.
Figure 3-15 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin
Password:
M A T R I X N7 GOLD
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: [email protected]
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->