Electrolux EEKG5048 - Manual (Page 28)

28 electrolux technical data
PROBLEM POSSIBLE SOLUTION
The flame colour is orange/yellow. Due to the design of the burner the flame
can appear to be orange/yellow (flame
disturbance) in certain areas of the burner
this is a natural occurrence.
The burner is not igniting or only partially
lighting.
Check that the burner is dry and that food
spillage or cleaning fluids are not present
on the burner. This can be dried with a
cloth and stubborn marks cleaned away
with a dry nylon brush (old toothbrush
etc.)
The burner sounds noisy. It is natural for the burners to emit noise
as the gas is being drawn through the
burner and may reduce as they heat up.
The burner is emitting a popping sound. This is a natural occurrence when the
burner is alight and does not affect the
performance of the burner.
Noise. It is normal for some metal parts on the
cooker to produce noise when in use, this
is due to expansion and contraction when
heating up and cooling down.
Technical data
Dimensions
Height: 900mm (nominal)
Width: 500mm (nominal)
Depth: 600mm (to front of door panel)
Weight: 54.4Kg
Space for fixing at hob level 2mm minimum clearance.
Space for fixing above hob level See important note ‘Location of appliance’.
Minimum space above hob level
787mm (If a cooker hood is fitted refer to
the cookerhood installation instructions).
Minimum distance from rear wall
5mm (spacer given by pressed spacer on
vent panel).
Connections
Gas connection
Rear left hand side of appliance at hob
level.
Rc ½” (½” B.S.P. female)
Electrical connection none
This appliance complies with: European Council Directives Low voltage
Directive 73/23/EEC, Gas Directive 90/396/EEC EMC Directive
89/336/EEC, CE Marking Directive 93/68/EEC
.